Using Sweepers

  • Updated on May 1, 2025
  • Published on Apr 4, 2025
  • 1 minute(s) read
Prev Next

Sweepers via Triton Settings is an optional feature that must be configured in your publisher profile. Contact your Triton Digital Client Success Manager or Customer Support to enable sweepers.

A sweeper is a short audio file that marks the beginning and end of an ad break. To use sweepers in Omny Studio:

  • Triton Digital must enable sweepers in your publisher profile (see note, above).

  • You need to configure your sweepers in Triton Settings.

  • Select your sweeper settings in Omny Studio for each program that will use sweepers (see below).

Configuring Sweepers for Programs

Before you can choose your program sweeper settings, sweepers must be enabled in your publisher profile and sweepers must be configured in Triton Settings.

To configure sweepers:

  1. Go to the program in Omny Studio for which you want to configure sweepers.

  2. Go to Program settings > Audio.

  3. Scroll down to the Station sweeper setting section. (This section will not appear if sweepers are not enabled in your publisher profile.)

  4. Click Click here to configure sweepers for the program.
    Triton Settings opens in a new browser tab, where you can configure your sweepers as described here.

Choosing Sweeper Settings for Programs

Once your sweepers are configured in Triton Settings, you can choose the settings on a program-by-program basis.

To choose sweeper settings for each program:

  1. Go to the program in Omny Studio for which you want to choose sweepers.

  2. Go to Program settings > Audio.

  3. Scroll down to the Station sweeper setting section. (This section will not appear if sweepers are not enabled in your publisher profile.)

  4. Select a sweeper option for the program.

  5. Read the tool tip and be sure you understand the option you are choosing; some sweeper options will block ad delivery if there are no sweeper files configured.

    Be sure the Station sweeper setting option you choose has been configured with corresponding sweeper audio files! If there are no sweeper audio files for the selected sweeper setting, ads might not run.

  6. Click Save changes.
    You are prompted to confirm that sweeper files are in place.