---
title: "Manually Sending a Cue Point"
slug: "manually-sending-a-cue-point"
updated: 2024-11-26T21:46:09Z
published: 2024-11-26T21:46:09Z
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.tritondigital.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Manually Sending a Cue Point

You can manually send a cue point from RAS Adapter at any time. A typical use case is when your station accidentally gets stuck in a constant BREAK because the endbreak cue point trigger was missed. You can quickly send a endbreak manually to bring the station out of BREAK mode.

**To manually send a cue point:**

1. **Right-click** anywhere in the main RAS Adapter window.
2. Click **Send Cue**.
3. In the Send Cue dialog box, add or edit the desired cue point, if necessary.
4. Click **Send**. The cue point is sent.

![Manual-send](https://cdn.document360.io/7124b381-0a94-401a-abbd-9df9c4ea5dff/Images/Documentation/fa32ad6e-acd5-4bf0-b269-769f0aec1055.png)